!!! Ende der Vermarktung - Keine weitere Entwicklung !!!

Einrichtung des Grandstream HT-701 Analog Adapters


1. Grandstream HT701 an Strom und Netzwerk anschließen

2. Analoges Telefon oder Fax an analogen Port 1 des HT701 anschließen

3. Adapter mit Angeschlossenem Gerät anrufen:
  *** eingeben, um Menü aufzurufen
  02  eingeben, um IP Adresse ansagen zu lassen

4. IP-Adresse im Browser aufrufen, Anmelden mit Password admin
   Konfig Server eintragen: Menü Advanced ->  Config Server Path: HTTPS datev-lb1.teamfon.com/grandstream -> Apply
   Automatic Upgrade: Every 5 Minutes -> Apply

5. Konfigurationstemplate in TeamSIP anlegen
   Vorlage Grandstream HT502, MAC Adresse aus Webseite Grandstream Menü Status

Parameter

Parameter

Beispielwert

Erläuterung










Template

bisheriges Template

HT-701

bisheriges Template

##############################################################################
##  Configuration for User %NAME% and phone with MAC %MAC%
##############################################################################

##############################################################################
##  Advanced/System-wide Options
##############################################################################

# Admin password for web interface
P2 = %TF_SUPERPIN%

#-------------------------------------------------------------
# Firmware Upgrade
#-------------------------------------------------------------

# Device Mode    0:Nat Router (DHCP Server)    1:Bridge (kein DHCP Server)
P231 = 1

# Enable LAN DHCP: No:0 Yes:1
P5001 = 0



# Reply to ICMP on WAN port 0:No  1:Yes
P189 = 1

# Firmware Upgrade. 0 - TFTP Upgrade,  1 - HTTP Upgrade.
P212 = 1

# Firmware Server Path
P192 = %TF_SERVER%/gs/fw
# Config Server Path
P237 = %TF_SERVER%/gs

# Automatic Upgrade. 0 - No, 1 - Yes (checking every defined days). Default is No.
P194 = 0

# Use firmware pre/postfix to determine if f/w is required
# 0 = Always Check for New Firmware
# 1 = Check New Firmware only when F/W pre/suffix changes
# 2 = Always Skip the Firmware Check
P238 = 0

# Authenticate Conf File
P240 = 0

# Time Zone:  TZO-1 = GMT+1:00 (Paris, Amsterdam, Berlin, Rome, Vienna, Madrid, Warsaw, Brussels)
P64 = TZO-1

# NTP Server
#P30 =

# start Telnetserver   1:No  0:Yes
P276 = 1

#-------------------------------------------------------------
# PHONE 1
#-------------------------------------------------------------
# Account Active  0:No  1:Yes
P271 = 1

# NAT Settings:  0:No  1:Yes  2:No, but send keep-alive
P52 = 0

# SIP User ID
P35 = %TF_CONTEXT%%TF_NUMMER%a

# Authenticate ID
P36 = %TF_CONTEXT%%TF_NUMMER%a

# SIP Server
P47 = %TF_SERVER%

# Outbound Proxy
P48 = %TF_SERVER%

# Authenticate Password
P34 = %TF_PASSWORD%

# Name
P3 = %TF_NACHNAME%

# Use DNS SRV 0:No 1:Yes
P103=0

# SIP Registration 0:No 1:Yes
P31 = 1

# Unregister On Reboot 0:No 1:Yes
P81 = 1

# DTMF in audio 0:No 1:Yes
P850 = 0

# DTMF via RFC2833 0:No 1:Yes
P851 = 1

# DTMF via SIP INFO 0:No 1:Yes
P852 = 0

# Send Hook Flash Event 0:No 1:Yes
P74 = 1

# Enable Call Features 0:No 1:Yes
P191 = 0

# Disable Call-Waiting: 0:No 1:Yes
P91 = 1

# Disable Call-Waiting Caller ID: 0:No 1:Yes
P714 = 1

# Disable Call-Waiting Tone: 0:No 1:Yes
P186 = 1

# Disable Visual MWI: 0:No 1:Yes
P855 = 1

# Fax mode 0:T.38 1:Pass-Through
P228 = 0

# Jitter buffer type: 0:Fixed 1:Adaptive
P133 = 0

# Jitter buffer length: 0:Low 1:Medium 2:High
P132 = 0

# SLIC Setting 5:GERMANY
P854 = 5

# Caller ID Scheme 5:ETSI-DTMF during ringing
P853 = 5

# Polarity Reversal 0:No 1:Yes
P205 = 0

# Hook Flash Timing (in milliseconds)
P251 = 300

# On Hook Timing
P833 = 400

#-------------------------------------------------------------
# PHONE 2
#-------------------------------------------------------------
# Account Active  0:No  1:Yes
P401 = 1

# NAT Settings:  0:No  1:Yes  2:No, but send keep-alive
P730 = 0

# SIP User ID
P735 = %TF_CONTEXT%%TF_NUMMER%b

# Authenticate ID
P736 = %TF_CONTEXT%%TF_NUMMER%b

# SIP Server
P47 = %TF_SERVER%

# Outbound Proxy
P48 = %TF_SERVER%

# Authenticate Password
P734 = %TF_PASSWORD%

# Name
P703 = %TF_NACHNAME%

# DNS Mode: 0:A-Record 1:SRV 2:NAPTR/SRV
P702 = 0

# SIP Registration 0:No 1:Yes
P731 = 1

# Unregister On Reboot 0:No 1:Yes
P752 = 1

# DTMF in audio 0:No 1:Yes
P860 = 0

# DTMF via RFC2833 0:No 1:Yes
P861 = 1

# DTMF via SIP INFO 0:No 1:Yes
P862 = 0

# Send Hook Flash Event 0:No 1:Yes
P774 = 1

# Enable Call Features 0:No 1:Yes
P751 = 0

# Disable Call-Waiting: 0:No 1:Yes
P791 = 1

# Disable Call-Waiting Caller ID: 0:No 1:Yes
P823 = 1

# Disable Call-Waiting Tone: 0:No 1:Yes
P817 = 1

# Disable Visual MWI: 0:No 1:Yes
P869 = 1

# Fax mode 0:T.38 1:Pass-Through
P710 = 0

# Jitter buffer type: 0:Fixed 1:Adaptive
P831 = 0

# Jitter buffer length: 0:Low 1:Medium 2:High
P832 = 0

# SLIC Setting 5:GERMANY
P864 = 5

# Caller ID Scheme 5:ETSI-DTMF during ringing
P863 = 5

# Polarity Reversal 0:No 1:Yes
P865 = 0

# Hook Flash Timing (in milliseconds)
P811 = 300

# On Hook Timing
P834 = 400
CODE

TeamSIP Standardtemplate (vorinstalliert)

##############################################################################
##  Advanced/System-wide Options
##############################################################################

# start Telnetserver   1:No  0:Yes
P276 = 1

# WAN side HTTP/Telnet access: 0 - No, 1 - Yes
P190 = 0

# Device Mode    0:Nat Router (DHCP Server)    1:Bridge (kein DHCP Server)
P231 = 1

# Enable LAN DHCP: No:0 Yes:1
P5001 = 0

# Reply to ICMP on WAN port 0:No  1:Yes
P189 = 1

# STUN server
P76 = stun.teamfon.com

#-------------------------------------------------------------
# Firmware Upgrade
#-------------------------------------------------------------

# Firmware Upgrade. 0 - TFTP Upgrade,  1 - HTTP Upgrade.
P212 = 1

# Firmware Server Path
P192 = %TF_SIPSERVER%/gs/fw
# Config Server Path
P237 = %TF_SIPSERVER%/gs

# Allow DHCP Option 66 to override server 0 - No, 1 - Yes
P145 = 1

# Automatic Upgrade. 0 - No, 1 - Yes (checking every defined days). Default is No.
P194 = 0

# Use firmware pre/postfix to determine if f/w is required
# 0 = Always Check for New Firmware
# 1 = Check New Firmware only when F/W pre/suffix changes
# 2 = Always Skip the Firmware Check
P238 = 0

# Authenticate Conf File 0 - No, 1 - Yes
P240 = 0

# Time Zone:  TZO-1 = GMT+1:00 (Paris, Amsterdam, Berlin, Rome, Vienna, Madrid, Warsaw, Brussels)
P64 = TZO-1

# NTP Server
P30 = %TF_SIPSERVER%

# DHCP Option 42 erlauben NTP Server zu ueberschreiben 0 - No, 1 - Yes.
P144 = 1

####################################################################
# Systemtöne
####################################################################

# Dial Tone
P4000 = f1=425@-10,c=0/0;

# Ring Back Tone
P4001 = f1=425@-12,c=1000/4000;

# Busy Tone
P4002 = f1=425@-12,c=500/500;

# Reorder Tone
P4003 = f1=425@-12,c=220/220;

# Confirmation Tone
P4004 = f1=425@-11,c=100/100-100/100-100/100;

# Call-Waiting Tone
P4005 = f1=425@-10,c=220/220-220/220-0/0;

#-------------------------------------------------------------
# PHONE 1
#-------------------------------------------------------------
# Account Active  0:No  1:Yes
P271 = 1

# SIP Server
P47 = %TF_SIPSERVER%

# Outbound Proxy
P48 = %TF_SIPSERVER%

# NAT Settings:  0:No  1:Yes  2:No, but send keep-alive
P52 = 1

# SIP User ID
P35 = %TF_ACCOUNT%

# Authenticate ID
P36 = %TF_ACCOUNT%

# Authenticate Password
P34 = %TF_PASSWORD%

# Name
P3 = %TF_NACHNAME%

# Use DNS SRV 0:No 1:Yes
P103=0

# SIP Registration 0:No 1:Yes
P31 = 1

# Unregister On Reboot 0:No 1:Yes
P81 = 1

# Outgoing Call without Registration 0:No 1:Yes
P109 = 1

# Preferred DTMF method Prio 1
P850 = 101
# Preferred DTMF method Prio 2
P851 = 101
# Preferred DTMF method Prio 3
P852 = 101

# Send Hook Flash Event 0:No 1:Yes
P74 = 1

# Enable Call Features 0:No 1:Yes
P191 = 0

# Disable Call-Waiting: 0:No 1:Yes
P91 = 1

# Disable Call-Waiting Caller ID: 0:No 1:Yes
P714 = 1

# Disable Call-Waiting Tone: 0:No 1:Yes
P186 = 1

# Disable Reminder Ring for On-Hold Call 0:No 1:Yes
P4360 = 1

# Disable Visual MWI: 0:No 1:Yes
P855 = 1

# Use # as Dial Key 0:No 1:Yes
P72 = 1

# Bevorzugte Vocoder:
# 0 = PCMU
# 2 = G.726-32
# 3 = GSM
# 4 = G.723.1
# 8 = PCMA
# 9 = G.722 (wide band)
# 18 = G.729A/B
# 98 = iLBC

# Auswahl 1:
P57 = 8
# Auswahl 2:
P58 = 0
# Auswahl 3:
P59 = 3
# Auswahl 4:
P60 = 8
# Auswahl 5:
P61 = 8
# Auswahl 6:
P62 = 8

# VAD (Voice Activity Detection) 0:No 1:Yes
P50 = 1

# Fax mode 0:T.38 1:Pass-Through
P228 = 0

# Fax tone detection mode 0:Callee, 1:Caller, 2:Both
P894 = 2

# Jitter buffer type: 0:Fixed 1:Adaptive
P133 = 0

# Jitter buffer length: 0:Low 1:Medium 2:High
P132 = 0

# SLIC Setting 5:GERMANY
P854 = 5

# Caller ID Scheme 5:ETSI-DTMF during ringing
P853 = 5

# Polarity Reversal 0:No 1:Yes
P205 = 0

# Hook Flash Timing (in milliseconds)
P251 = 300

# On Hook Timing
P833 = 400
CODE