!!! Ende der Vermarktung - Keine weitere Entwicklung !!!

Das Tiptel 3220XL ist ein Telefon für Senioren und bietet große Tasten und eine Notruf Funktion.

Bei der Notruf Funktion werden bis zu 3 Rufnummern hinterlegt, die nacheinander angerufen werden, bis die Gegenstelle den Anruf mit DTMF Taste 5 bestätigt hat.

Anleitungen

Bedienungsanleitung:
Tiptel Seite

Weitere auf der Webseite verfügbare Dokumente:

Webseite:
http://www.tiptel.de/

Funktionen am Telefon

Default Admin PIN: keine
Ermittlung MAC Adresse und IP:
Auf Menü Taste drücken und Bestätigen Taste wählen
Neustart Prozedur:
keine

Webinterface

Das Webinterface des Telefons wird mit folgendem Link erreicht:
http://<ip-adress-des-Telefons>
Kennwort nach Factory Reset:
admin
Neustart Prozedur:
Rechts Menüpunkt Starten -> Basis -> Reboot → OK
Eintrag des Provisionierungs-Servers
Rechts Menüpunkt Starten → Erweitert → Manual Autop -> URL: Server eintragen, z. B. https://www.teamsip.com/tiptel -> Bestätigen -> Sofortiges Autoprovisioning Start

Anleitung zur manuellen Konfiguration

noch keine Anleitung vorhanden.

Funktionsumfang

Das Telefon unterstützt folgende Leistungsmerkmale mit Firmware Version

Firmware Version: 15.138.6.22

Leistungsmerkmal	Verfügbar	Bemerkung
1. Provisionierung
1.1 Power over Ethernet	ja
1.2 http Unterstützung	ja
1.3 https Unterstützung:	ja
1.4 Automatisches Konfigurationsupdate	ja
1.5 Firmware Update	ja	Über Download Link in u. a. Provisionierungs Beispiel.
1.6 Automatische Zeiteinstellung	ja
1.7 Registration Timer	ja
1.8 DTMF RFC2833	ja
1.9 Signalisierung UDP	ja
1.10 Signalisierung TCP		noch nicht getestet
1.11 Signalisierung TLS		noch nicht getestet
1.12 Verschlüsselung Sprachkanal mit SRTP		noch nicht getestet
1.13 Passwortschutz Weboberfläche	ja
2. Funktionstasten
2.1 Lautstärke	ja
2.2 Stummschaltung	nein
2.3 Lauthören	ja
2.4 Bestätigen	ja
2.5 Abbrechen	ja	Unterhalb Display im Kontext
2.6 Headset	ja
2.7 Nicht stören	ja	als programmierbare Taste unterhalb Display
2.8 Wahlwiederholung	ja
2.9 Rufumleitung	ja	als programmierbare Taste unterhalb Display
2.10 BLF Tasten Status	nein
2.11 BLF Tasten Übernahme	nein
2.12 BLF Tasten Kurzwahl	ja
2.13 Anruflisten	ja
3. Basisfunktionen
3.1 Codec Unterstützung	ja	G.722, G.711(A/μ), G.723, G.729AB, G.726, GSM, iLBC
3.2 Rufnummern Anzeige	ja
3.3 Rufnummern Anzeige nach Verbinden / Pickup	ja
3.4 Wahl bei aufgelegtem Hörer	ja	Nummer wählen, Freisprechen drücken
3.5 Anzeige Gesprächsdauer	ja	Display unter Zeit
3.6 Anklopfen	ja
3.7 Makeln	ja	"Wechseln" Drücken
3.8 Dreier-Konferenz	ja	Ersten Anruf aufbauen, zweiten Anruf annehmen und Halten. Taste "Konferenz" drücken.
3.9 Weiterleitung mit Rückfrage	ja	Anruf annehmen, "Halten", dann "Neues Gespräch aufbauen" drücken, Nummer wählen, sprechen und dann "Weiterleiten" drücken. Oder: "Weiterleiten" drücken, Nummer wählen und OK, sprechen, "Weiterleiten" erneut drücken oder Auflegen.
3.10 Weiterleitung ohne Rückfrage	ja	Anruf annehmen. "Weiterleiten" drücken und "Weiterleiten" drücken. Oder: "Weiterleiten/Transfer", Nummer eintippen und "Weiterleiten/Transfer" nochmals drücken.
3.11 Rückruf bei Besetzt	ja	Kann als Tiptel Funktion am Telefon programmiert werden.
3.12 Gespräch länger 30 Minuten	ja
4. Zusatzfunktionen
4.1 verschiedene Klingeltöne	ja	Settings -> Rufton
4.2 Eigene Klingeltöne	ja
4.3 Vollduplex-Freisprechen	ja
4.5 Selbstbeschriftende Tasten	nein
4.6 XML-Anwendungen	ja	nicht getestet
5. Telefonbuch
5.1 Telefonbuch am Telefon	ja
5.2 Telefonbuch über LDAP	nein
5.3 Telefonbuch über xml
6. Anrufbeantworter
6.1 MWI - Message Waiting Indicator	ja	Am Display und als Meldung und Symbol.
7. Headset
7.1 Kabelheadsets	ja
7.2 EHS Headsets	ja
8. Erweiterungsmodule
8.1 Funktionstasten Erweiterungsmodul	nein
9. TeamSIP Funktionen
9.1 Rufumleitung in TeamSIP	ja
9.2 Persönliches Telefonbuch aus TeamSIP	nein
9.3 Globales Telefonbuch aus Teamsip	nein
9.4 Callcenter Anmeldung mit Status Anzeige	nein
9.5 Neustart über SIP Notify	ja	sip notify tiptel-reboot-cfg 10001909a [tiptel-reboot-cfg] Event=>check-sync reboot=>false
9.6 Reload über SIP Notify	ja
9.7 Klingelton Unterscheidung intern/extern	nein

TeamSIP Provisionierungs Template

Nutzbare Tasten

Unten aufgeführtes Beispiel nutzt 6 belegbare Tasten in der TeamSIP Weboberfläche, die ersten drei Plätze sind mit den Notruf Nummern belegt.

Am Telefon nutzbar sind die drei Tasten neben dem Display und die SOS Notruf Taste.

Konfigurationsbeispiel

Parameter für dieses Template:

Name	Vorgabe
TF_FIRMWARE

Das geteste Telefon wurde mit dieser Provisionierungsvorlage als Telefon in TeamSIP konfiguriert:

TeamSIP Telefon Template

# Use Ctrl+A to select all and copy this in your editor


#Configure the url of the firmware file server, support ftp/tftp/http/https protocol, the suffix of the file name must be .rom;
Config.Firmware.Url = 

#Configure the url of the custom ringtone file server, support ftp/tftp/http/https protocol, the suffix of the file name must be .wav;
Config.Ringtone.Url = 

#Configure the url of the contact file server, support ftp/tftp/http/https protocol, the suffix of the file name must be .xml;
Config.Contact.Url = 

#configure the url of client certificate
Config.Certificate.01.Url=

# Autoprovision Configuration

Config.Autoprovision.GENERAL.Url = http://%TF_SIPSERVER%/tiptel/
Config.Autoprovision.MODE.Mode = 1

Config.Autoprovision.SCHEDULE.DayOfWeek = 7
Config.Autoprovision.SCHEDULE.SomeDayOfWeek = 7
Config.Autoprovision.SCHEDULE.HourOfDay = 22
Config.Autoprovision.SCHEDULE.MinuteOfHour = 0
Config.Autoprovision.SCHEDULE.SecondOfMinute = 0

Config.Autoprovision.REBOOT_MODE.Mode = 0

Config.Autoprovision.REBOOT_SCHEDULE.DayOfWeek = 0
Config.Autoprovision.REBOOT_SCHEDULE.HourOfDay = 0
Config.Autoprovision.REBOOT_SCHEDULE.Edit = 0

Config.Autoprovision.PNP.Enable = 1
Config.Autoprovision.PNP.Url = 

Config.Autoprovision.DHCP_OPTION.Enable = 1
Config.Autoprovision.DHCP_OPTION.CustomId = 
Config.Autoprovision.DHCP_OPTION.CustomValue = 

Config.Autoprovision.RETRY_TIMES.Times = 0

Config.Autoprovision.REDIRECT.Url = https://redirect.akuvox.com
Config.Autoprovision.REDIRECT.Enable = 0


# Network Configuration

Config.Network.LAN.Type = 0
Config.Network.LAN.StaticIP = 
Config.Network.LAN.SubnetMask = 
Config.Network.LAN.DefaultGateway = 
Config.Network.LAN.PrimaryDNS = 
Config.Network.LAN.SecondaryDNS = 
Config.Network.LAN.Enable = 
Config.Network.LAN.UseStaticDNS = 

Config.Network.PPPOE.User = 
Config.Network.PPPOE.Pwd = iwOzM/AooXwdghWSmlzWiKTBlTM0M2iLLPUsQfCCXkEV9ZaLkJWVpPXDhrs2

Config.Network.PC.Type = 1
Config.Network.PC.RouterIP = 10.0.0.1
Config.Network.PC.SubnetMask = 255.255.255.0
Config.Network.PC.EnableDHCP = 1
Config.Network.PC.StartIP = 10.0.0.10
Config.Network.PC.EndIP = 10.0.0.100

Config.Network.8021X.ModeOf8021X = 0
Config.Network.8021X.Identity = 
Config.Network.8021X.PwdMd5 = KJv1QizCxHxBxPeWokBCLUCLxQ+GUDIznPChRqT1x7NCifDxwolD9UEoiTf+

Config.Network.RTPPORT.Max = 12000
Config.Network.RTPPORT.Min = 11800

Config.Network.QOS.SignalTos = 40
Config.Network.QOS.RtpTos = 40

Config.Network.LLDP.LLDPEnable = 0
Config.Network.LLDP.Interval = 30

Config.Network.VPN.Enable = 0

# TR069 Configuration
# Account1 Configuration

Config.Account1.GENERAL.Enable = 1
Config.Account1.GENERAL.Label = %TF_VORNAME% %TF_NACHNAME%
Config.Account1.GENERAL.DisplayName = %TF_NACHNAME%
Config.Account1.GENERAL.UserName = %TF_ACCOUNT%
Config.Account1.GENERAL.AuthName = %TF_ACCOUNT%
Config.Account1.GENERAL.Pwd = %TF_PASSWORD%
Config.Account1.GENERAL.UserAgent = 

Config.Account1.SIP.Server = %TF_SIPSERVER%
Config.Account1.SIP.Server2 = %TF_SIPSERVER%
Config.Account1.SIP.Port = 5060
Config.Account1.SIP.Port2 = 5060
Config.Account1.SIP.TransType = 0
Config.Account1.SIP.ListenPortMin = 5062
Config.Account1.SIP.ListenPortMax = 5062

Config.Account1.OUTPROXY.Enable = 0
Config.Account1.OUTPROXY.Server = 
Config.Account1.OUTPROXY.Port = 5060
Config.Account1.OUTPROXY.BakServer = 
Config.Account1.OUTPROXY.BakPort = 5060
Config.Account1.OUTPROXY.DHCPOption = 

Config.Account1.STUN.Enable = 0
Config.Account1.STUN.Server = 
Config.Account1.STUN.Port = 3478

Config.Account1.ENCRYPTION.SRTPEncryption = 0
Config.Account1.ENCRYPTION.SRTPEncryptionAlg = 0

Config.Account1.DTMF.Type = 2
Config.Account1.DTMF.Payload = 101
Config.Account1.DTMF.InfoType = 0
Config.Account1.DTMF.Duration = 300
Config.Account1.DTMF.Power = 

Config.Account1.NAT.UdpKeepEnable = 1
Config.Account1.NAT.UdpKeepInterval = 30
Config.Account1.NAT.Rport = 0

Config.Account1.VOICEMSG.Number = *99

Config.Account1.MUSIC_SERVER.Uri = 
Config.Account1.MUSIC_SERVER.Enable = 0

Config.Account1.ANONYMOUS_CALL.Enable = 0
Config.Account1.ANONYMOUS_CALL.OnCode = 
Config.Account1.ANONYMOUS_CALL.OffCode = 
Config.Account1.ANONYMOUS_CALL.PrivacyHeaderValue = id

Config.Account1.REJECT_ANONYMOUSCALL.Enable = 0
Config.Account1.REJECT_ANONYMOUSCALL.OnCode = 
Config.Account1.REJECT_ANONYMOUSCALL.OffCode = 

Config.Account1.REG.Timeout = 900
Config.Account1.REG.Timeout2 = 900

Config.Account1.CONFERENCE.Type = 0
Config.Account1.CONFERENCE.Uri = 

Config.Account1.AUTO_ANSWER.Enable = 0
Config.Account1.AUTO_ANSWER.Number = 

Config.Account1.SESSION.EnableTimer = 1
Config.Account1.SESSION.Interval = 900
Config.Account1.SESSION.Refresher = 0

Config.Account1.SUBSCRIBE.SubscribeACDExpire = 900
Config.Account1.SUBSCRIBE.SubsribeMWI = 0
Config.Account1.SUBSCRIBE.SubscribeMWIExpire = 900

Config.Account1.CALL.Enable100Rel = 0
Config.Account1.CALL.CIDSource = 2
Config.Account1.CALL.Ptime = 20
Config.Account1.CALL.UserPhone = 0
Config.Account1.CALL.RdrInfoDetection = 0
Config.Account1.CALL.PreventSIPHacking = 0
Config.Account1.CALL.UseRemoteCodec = 1

Config.Account1.FEATURE_DND.Enable = 
Config.Account1.FEATURE_DND.OnCode = 
Config.Account1.FEATURE_DND.OffCode = 
Config.Account1.FEATURE_DND.ReturnCode = 486

Config.Account1.FEATURE_FORWARD_ALWAYS.Enable = 
Config.Account1.FEATURE_FORWARD_ALWAYS.LastEnable = 0
Config.Account1.FEATURE_FORWARD_ALWAYS.Target = 
Config.Account1.FEATURE_FORWARD_ALWAYS.OnCode = 
Config.Account1.FEATURE_FORWARD_ALWAYS.OffCode = 

Config.Account1.FEATURE_FORWARD_BUSY.Enable = 
Config.Account1.FEATURE_FORWARD_BUSY.LastEnable = 0
Config.Account1.FEATURE_FORWARD_BUSY.Target = 
Config.Account1.FEATURE_FORWARD_BUSY.OnCode = 
Config.Account1.FEATURE_FORWARD_BUSY.OffCode = 

Config.Account1.FEATURE_FORWARD_TIMEOUT.Enable = 
Config.Account1.FEATURE_FORWARD_TIMEOUT.LastEnable = 0
Config.Account1.FEATURE_FORWARD_TIMEOUT.Target = 
Config.Account1.FEATURE_FORWARD_TIMEOUT.OnCode = 
Config.Account1.FEATURE_FORWARD_TIMEOUT.OffCode = 
Config.Account1.FEATURE_FORWARD_TIMEOUT.TimeOut = 30

Config.Account1.Audio0.Enable = 0
Config.Account1.Audio0.Name = PCMU
Config.Account1.Audio0.Priority = 13
Config.Account1.Audio0.Payload = 0

Config.Account1.Audio1.Enable = 1
Config.Account1.Audio1.Name = PCMA
Config.Account1.Audio1.Priority = 5
Config.Account1.Audio1.Payload = 8

Config.Account1.Audio2.Enable = 0
Config.Account1.Audio2.Name = G723_53
Config.Account1.Audio2.Priority = 11
Config.Account1.Audio2.Payload = 4

Config.Account1.Audio3.Enable = 0
Config.Account1.Audio3.Name = G723_63
Config.Account1.Audio3.Priority = 10
Config.Account1.Audio3.Payload = 4

Config.Account1.Audio4.Enable = 0
Config.Account1.Audio4.Name = G729
Config.Account1.Audio4.Priority = 9
Config.Account1.Audio4.Payload = 18

Config.Account1.Audio5.Enable = 1
Config.Account1.Audio5.Name = G722
Config.Account1.Audio5.Priority = 10
Config.Account1.Audio5.Payload = 9

Config.Account1.Audio6.Enable = 0
Config.Account1.Audio6.Name = G726-16
Config.Account1.Audio6.Priority = 6
Config.Account1.Audio6.Payload = 112

Config.Account1.Audio7.Enable = 0
Config.Account1.Audio7.Name = G726-24
Config.Account1.Audio7.Priority = 5
Config.Account1.Audio7.Payload = 102

Config.Account1.Audio8.Enable = 0
Config.Account1.Audio8.Name = G726-32
Config.Account1.Audio8.Priority = 4
Config.Account1.Audio8.Payload = 2

Config.Account1.Audio9.Enable = 0
Config.Account1.Audio9.Name = G726-40
Config.Account1.Audio9.Priority = 3
Config.Account1.Audio9.Payload = 104

Config.Account1.Audio10.Enable = 0
Config.Account1.Audio10.Name = iLBC_13_3
Config.Account1.Audio10.Priority = 2
Config.Account1.Audio10.Payload = 97

Config.Account1.Audio11.Enable = 0
Config.Account1.Audio11.Name = iLBC_15_2
Config.Account1.Audio11.Priority = 1
Config.Account1.Audio11.Payload = 97

Config.Account1.Audio12.Enable = 0
Config.Account1.Audio12.Name = NONE
Config.Account1.Audio12.Priority = 0
Config.Account1.Audio12.Payload = 0

Config.Account1.AOC.AocEnable = 0

Config.Account1.RINGTONE.Type = 

Config.Account1.ESCAPE_CHARACTER.Enable = 1

Config.Account1.ADVANCED.ShowMissedCall = 1

# Call Forward Configuration

Config.Forward.ALWAYS.Enable = 0
Config.Forward.ALWAYS.LastEnable = 0
Config.Forward.ALWAYS.Target = 
Config.Forward.ALWAYS.OnCode = 
Config.Forward.ALWAYS.OffCode = 

Config.Forward.BUSY.Enable = 0
Config.Forward.BUSY.LastEnable = 0
Config.Forward.BUSY.Target = 
Config.Forward.BUSY.OnCode = 
Config.Forward.BUSY.OffCode = 

Config.Forward.TIMEOUT.Enable = 0
Config.Forward.TIMEOUT.LastEnable = 0
Config.Forward.TIMEOUT.Target = 
Config.Forward.TIMEOUT.Timeout = 30
Config.Forward.TIMEOUT.OnCode = 
Config.Forward.TIMEOUT.OffCode = 

Config.Forward.CALLPARK.Enable = 0
Config.Forward.CALLPARK.Target = 
Config.Forward.CALLPARK.Line = 0

Config.Forward.FORWARDMODE.Mode = 0
Config.Forward.FORWARDMODE.FeatureSync = 

Config.Forward.ADVANCED.UseFwdAsTransfer = 1

# LDAP Configuration

# AreaCode Configuration

Config.AreaCode.GENERAL.Code = 
Config.AreaCode.GENERAL.MinLen = 1
Config.AreaCode.GENERAL.MaxLen = 1
Config.AreaCode.GENERAL.Account = 0

# Feature Configuration

Config.Features.CALL_WAITING.Enable = 1
Config.Features.CALL_WAITING.PlayTone = 1

Config.Features.HOTLINE.Enable = 0
Config.Features.HOTLINE.Number = 
Config.Features.HOTLINE.Delay = 4

Config.Features.AUTO_REDIAL.Enable = 0
Config.Features.AUTO_REDIAL.Interval = 10
Config.Features.AUTO_REDIAL.Times = 3

Config.Features.DND.Enable = 0
Config.Features.DND.ReturnCode = 486
Config.Features.DND.OnCode = 
Config.Features.DND.OffCode = 

Config.Features.REJECT.ReturnCode = 486

Config.Features.INTERCOM.Enable = 1
Config.Features.INTERCOM.Mute = 0

Config.Features.DIALNOW.Delay = 1
Config.Features.DIALNOW.DialAll = 0
Config.Features.DIALNOW.DialAllForHandfree = 0
Config.Features.DIALNOW.DialAllForHeadset = 0

Config.Features.AUTOANSWER.Delay = 0

Config.Features.Others.EarlyDTMF = 0
Config.Features.Others.ViewHistoryType = 

Config.Features.CALLROBIN.Num01 = %TF_NTNUMMER_1%
Config.Features.CALLROBIN.Num02 = %TF_NTNUMMER_2%
Config.Features.CALLROBIN.Num03 = %TF_NTNUMMER_3%
Config.Features.CALLROBIN.Time = 60

Config.Features.ACTIONURL.SetupCompleted = 
Config.Features.ACTIONURL.Registered = 
Config.Features.ACTIONURL.Unregistered = 
Config.Features.ACTIONURL.RegisterFailed = 
Config.Features.ACTIONURL.OffHook = 
Config.Features.ACTIONURL.OnHook = 
Config.Features.ACTIONURL.IncomingCall = 
Config.Features.ACTIONURL.OutgoingCall = 
Config.Features.ACTIONURL.Established = 
Config.Features.ACTIONURL.Terminated = 
Config.Features.ACTIONURL.OpenDND = 
Config.Features.ACTIONURL.CloseDND = 
Config.Features.ACTIONURL.OpenAlwaysForward = 
Config.Features.ACTIONURL.CloseAlwaysForward = 
Config.Features.ACTIONURL.OpenBusyForward = 
Config.Features.ACTIONURL.CloseBusyForward = 
Config.Features.ACTIONURL.OpenNoAnswerForward = 
Config.Features.ACTIONURL.CloseNoAnswerForward = 
Config.Features.ACTIONURL.TransferCall = 
Config.Features.ACTIONURL.BlindTransfer = 
Config.Features.ACTIONURL.AttendedTransfer = 
Config.Features.ACTIONURL.Hold = 
Config.Features.ACTIONURL.UnHold = 
Config.Features.ACTIONURL.Mute = 
Config.Features.ACTIONURL.UnMute = 
Config.Features.ACTIONURL.MissedCall = 
Config.Features.ACTIONURL.IPChanged = 
Config.Features.ACTIONURL.ForwardInComingCall = 
Config.Features.ACTIONURL.RejectInComingCall = 
Config.Features.ACTIONURL.AnswerNewInCall = 
Config.Features.ACTIONURL.TransferFinished = 
Config.Features.ACTIONURL.TransferFailed = 
Config.Features.ACTIONURL.IdleToBusy = 
Config.Features.ACTIONURL.BusyToIdle = 
Config.Features.ACTIONURL.Enable = 0

Config.Features.REMOTECONTROL.ActionURIAllowIPList = 

Config.Features.SENDKEY.KeySendType = 1

Config.Features.CALLCOMPELETE.Enable = 0

Config.Features.DIALSEARCH.Enable = 1
Config.Features.DIALSEARCH.Delay = 800

Config.Features.HangupTone.Enable = 1

# Setting Configuration

Config.Settings.LANGUAGE.Type = 10
Config.Settings.LANGUAGE.ActiveWebLang = 
Config.Settings.LANGUAGE.WebLang = 10

Config.Settings.DATETIME.Type = 0
Config.Settings.DATETIME.TimeFormat = 1
Config.Settings.DATETIME.DateFormat = 2
Config.Settings.DATETIME.Offset = 60

Config.Settings.SNTP.Enable = 1
Config.Settings.SNTP.TimeZone = +1
Config.Settings.SNTP.Name = Germany(Berlin)
Config.Settings.SNTP.NTPServer1 = %TF_SIPSERVER%0.pool.ntp.org
Config.Settings.SNTP.NTPServer2 = 1.pool.ntp.org
Config.Settings.SNTP.DTS = 2
Config.Settings.SNTP.Interval = 3600
Config.Settings.SNTP.StartTime = 1/1/0
Config.Settings.SNTP.EndTime = 12/31/23

Config.Settings.BACKLIGHT.Level = 5
Config.Settings.BACKLIGHT.Time = 0
Config.Settings.BACKLIGHT.FreeLevel = 0

Config.Settings.GENERAL.DirectIP = 1
Config.Settings.GENERAL.WebTitle = IP Phone
Config.Settings.GENERAL.HttpUserAgent = 
Config.Settings.GENERAL.UseStarForIP = 

Config.Settings.LOGLEVEL.Level = 3
Config.Settings.LOGLEVEL.RemoteSyslog = 0
Config.Settings.LOGLEVEL.RemoteServer = 

Config.Settings.PCAP.RefreshEnable = 0

Config.Settings.RINGTONE.Type = Ring1.wav

Config.Settings.AUDIO.KeyVol = 8
Config.Settings.AUDIO.KeyMidVol = 18
Config.Settings.AUDIO.RingVol = 8
Config.Settings.AUDIO.RingMidVol = 14

Config.Settings.HANDFREE.SpkVol = 8
Config.Settings.HANDFREE.MicVol = 8
Config.Settings.HANDFREE.SpkMidValue = 18
Config.Settings.HANDFREE.MicMidValue = 18
Config.Settings.HANDFREE.SigToneVol = 8
Config.Settings.HANDFREE.SigToneMidVol = 18

Config.Settings.HEADSET.Active = 0
Config.Settings.HEADSET.SigToneVol = 8
Config.Settings.HEADSET.SigToneMidVol = 10
Config.Settings.HEADSET.SpkVol = 8
Config.Settings.HEADSET.MicVol = 8
Config.Settings.HEADSET.SpkMidValue = 18
Config.Settings.HEADSET.MicMidValue = 18
Config.Settings.HEADSET.PlayRing = 0

Config.Settings.HANDSET.SigToneVol = 8
Config.Settings.HANDSET.SigToneMidVol = 20
Config.Settings.HANDSET.SpkVol = 8
Config.Settings.HANDSET.MicVol = 8
Config.Settings.HANDSET.SpkMidValue = 20
Config.Settings.HANDSET.MicMidValue = 20

Config.Settings.EQULIZER.EqLevel = 

Config.Settings.LOGIN.User = admin
Config.Settings.LOGIN.Password = team%TF_CONTEXT%

Config.Settings.WEB_LOGIN.User = admin
Config.Settings.WEB_LOGIN.Password = team%TF_CONTEXT%
Config.Settings.WEB_LOGIN.Type = admin
Config.Settings.WEB_LOGIN.User02 = user
Config.Settings.WEB_LOGIN.Password02 = team%TF_CONTEXT%
Config.Settings.WEB_LOGIN.Type02 = user

Config.Settings.WEB_LOGIN_STATUS.Active = 1
Config.Settings.WEB_LOGIN_STATUS.SessionTimeOut = 300

Config.Settings.CALLTIMEOUT.DialOut = 60
Config.Settings.CALLTIMEOUT.DialIn = 60

Config.Settings.DTMFCODE.DTMFCode = 0

Config.Settings.RINGER.Keyword01 = 
Config.Settings.RINGER.Ringtone01 = 
Config.Settings.RINGER.Keyword02 = 
Config.Settings.RINGER.Ringtone02 = 
Config.Settings.RINGER.Keyword03 = 
Config.Settings.RINGER.Ringtone03 = 
Config.Settings.RINGER.Keyword04 = 
Config.Settings.RINGER.Ringtone04 = 
Config.Settings.RINGER.Keyword05 = 
Config.Settings.RINGER.Ringtone05 = 
Config.Settings.RINGER.Keyword06 = 
Config.Settings.RINGER.Ringtone06 = 
Config.Settings.RINGER.Keyword07 = 
Config.Settings.RINGER.Ringtone07 = 
Config.Settings.RINGER.Keyword08 = 
Config.Settings.RINGER.Ringtone08 = 
Config.Settings.RINGER.Keyword09 = 
Config.Settings.RINGER.Ringtone09 = 
Config.Settings.RINGER.Keyword10 = 
Config.Settings.RINGER.Ringtone10 = 
Config.Settings.RINGER.Keyword11 = 
Config.Settings.RINGER.Ringtone11 = 
Config.Settings.RINGER.Keyword12 = 
Config.Settings.RINGER.Ringtone12 = 

Config.Settings.DATEDISPLAY.DisplayMode = 1

Config.Settings.OTHERS.QuickReset = 1

Config.Settings.SECURITY.OnlyAcceptTrusted = 0

Config.Settings.DNS.SipDnsCacheLevel = 

# Programmable Key Configuration

Config.Programable.SOFTKEY01.Type = 11
Config.Programable.SOFTKEY01.Label = 
Config.Programable.SOFTKEY01.Param1 = 
Config.Programable.SOFTKEY01.Param2 = 0
Config.Programable.SOFTKEY01.Param3 = 

Config.Programable.SOFTKEY02.Type = 5
Config.Programable.SOFTKEY02.Label = 
Config.Programable.SOFTKEY02.Param1 = 
Config.Programable.SOFTKEY02.Param2 = 0
Config.Programable.SOFTKEY02.Param3 = 

Config.Programable.SOFTKEY03.Type = 1
Config.Programable.SOFTKEY03.Label = 
Config.Programable.SOFTKEY03.Param1 = 
Config.Programable.SOFTKEY03.Param2 = 0
Config.Programable.SOFTKEY03.Param3 = 

Config.Programable.SOFTKEY04.Type = 2
Config.Programable.SOFTKEY04.Label = 
Config.Programable.SOFTKEY04.Param1 = 
Config.Programable.SOFTKEY04.Param2 = 0
Config.Programable.SOFTKEY04.Param3 = 

Config.Programable.REDIAL.Type = 13
Config.Programable.REDIAL.Param1 = 
Config.Programable.REDIAL.Param2 = 0
Config.Programable.REDIAL.Param3 = 

Config.Programable.SOS.Type = 31
Config.Programable.SOS.Param1 = 
Config.Programable.SOS.Param2 = 
Config.Programable.SOS.Param3 = 

Config.Programable.MEMORYKEY01.Type = 10
Config.Programable.MEMORYKEY01.Param1 = %TF_NTNUMMER_4%
Config.Programable.MEMORYKEY01.Param2 = 
Config.Programable.MEMORYKEY01.Param3 = 

Config.Programable.MEMORYKEY02.Type = 10
Config.Programable.MEMORYKEY02.Param1 = %TF_NTNUMMER_5%
Config.Programable.MEMORYKEY02.Param2 = 
Config.Programable.MEMORYKEY02.Param3 = 

Config.Programable.MEMORYKEY03.Type = 10
Config.Programable.MEMORYKEY03.Param1 = %TF_NTNUMMER_6%
Config.Programable.MEMORYKEY03.Param2 = 
Config.Programable.MEMORYKEY03.Param3 = 
Config.Programable.RFKEY01.Type = 31
Config.Programable.RFKEY01.Param1 = 
Config.Programable.RFKEY01.Param2 = 
Config.Programable.RFKEY01.Param3 = 

Config.Programable.RFKEY02.Type = 31
Config.Programable.RFKEY02.Param1 = 
Config.Programable.RFKEY02.Param2 = 
Config.Programable.RFKEY02.Param3 = 

Config.Programable.RFKEY03.Type = 31
Config.Programable.RFKEY03.Param1 = 
Config.Programable.RFKEY03.Param2 = 
Config.Programable.RFKEY03.Param3 = 

Config.Programable.RFKEY04.Type = 31
Config.Programable.RFKEY04.Param1 = 
Config.Programable.RFKEY04.Param2 = 
Config.Programable.RFKEY04.Param3 = 

Config.Programable.RFKEY05.Type = 31
Config.Programable.RFKEY05.Param1 = 
Config.Programable.RFKEY05.Param2 = 
Config.Programable.RFKEY05.Param3 = 

Config.Programable.RFKEY06.Type = 31
Config.Programable.RFKEY06.Param1 = 
Config.Programable.RFKEY06.Param2 = 
Config.Programable.RFKEY06.Param3 = 

Config.Programable.RFKEY07.Type = 31
Config.Programable.RFKEY07.Param1 = 
Config.Programable.RFKEY07.Param2 = 
Config.Programable.RFKEY07.Param3 = 

Config.Programable.RFKEY08.Type = 31
Config.Programable.RFKEY08.Param1 = 
Config.Programable.RFKEY08.Param2 = 
Config.Programable.RFKEY08.Param3 = 

Config.Programable.RFKEY09.Type = 31
Config.Programable.RFKEY09.Param1 = 
Config.Programable.RFKEY09.Param2 = 
Config.Programable.RFKEY09.Param3 = 

Config.Programable.RFKEY10.Type = 31
Config.Programable.RFKEY10.Param1 = 
Config.Programable.RFKEY10.Param2 = 
Config.Programable.RFKEY10.Param3 = 

Config.Programable.DETECT.Key01 = 
Config.Programable.DETECT.Key02 = 
Config.Programable.DETECT.Key03 = 
Config.Programable.DETECT.Key04 = 
Config.Programable.DETECT.Key05 = 
Config.Programable.DETECT.Key06 = 
Config.Programable.DETECT.Key07 = 
Config.Programable.DETECT.Key08 = 
Config.Programable.DETECT.Key09 = 
Config.Programable.DETECT.Key10 = 

# Tone Configuration

Config.Tone.GENERAL.Ringback = 
Config.Tone.GENERAL.Dialtone = 
Config.Tone.GENERAL.Callwait = 

# Voice Configuration

Config.Voice.GENERAL.VAD = 0
Config.Voice.GENERAL.CNG = 1
Config.Voice.GENERAL.SideTone = -32768
Config.Voice.GENERAL.EchoCanceller = 1

Config.Voice.JITTER.Enable = 1
Config.Voice.JITTER.Adaptive = 1
Config.Voice.JITTER.Min = 0
Config.Voice.JITTER.Max = 300
Config.Voice.JITTER.Nominal = 120

Config.Voice.TONE.Country = 11

Config.Voice.DTMF.Repetition = 10
Config.Voice.DTMF.Duration = 150

Config.Voice.RTCP.Enable = 1
Config.Voice.RTCP.Interval = 5
Config.Voice.RTCP.RTCPXR = 0

Config.Voice.G726.Coding = 0

Config.Voice.VOICEMESSAGE.VoiceMsgFile = 

# CustomcMenu Configuration

Config.CustomMenu.DIALMENUITEM01.Type = 0
Config.CustomMenu.DIALMENUITEM01.Label = History
Config.CustomMenu.DIALMENUITEM01.Param1 = 

Config.CustomMenu.DIALMENUITEM02.Type = 1
Config.CustomMenu.DIALMENUITEM02.Label = Local Phone Book
Config.CustomMenu.DIALMENUITEM02.Param1 = 

# Multicast Configuration

Config.Multicast.PRIORITY.Enable = 1
Config.Multicast.PRIORITY.Priority = 0

Config.Multicast.GENERAL.Codec = 

Config.Multicast.LISTEN0.Label = 
Config.Multicast.LISTEN0.IP = 

Config.Multicast.LISTEN1.Label = 
Config.Multicast.LISTEN1.IP = 

Config.Multicast.LISTEN2.Label = 
Config.Multicast.LISTEN2.IP = 

Config.Multicast.LISTEN3.Label = 
Config.Multicast.LISTEN3.IP = 

Config.Multicast.LISTEN4.Label = 
Config.Multicast.LISTEN4.IP = 

Config.Multicast.LISTEN5.Label = 
Config.Multicast.LISTEN5.IP = 

Config.Multicast.LISTEN6.Label = 
Config.Multicast.LISTEN6.IP = 

Config.Multicast.LISTEN7.Label = 
Config.Multicast.LISTEN7.IP = 

Config.Multicast.LISTEN8.Label = 
Config.Multicast.LISTEN8.IP = 

Config.Multicast.LISTEN9.Label = 
Config.Multicast.LISTEN9.IP =

HTML/XML