Yealink T41P
Anleitungen
Bedienungsanleitung:
Yealink Seite
Weitere auf der Webseite verfügbare Dokumente:
Webseite:
http://www.yealink.com/
Funktionen am Telefon
- Default Admin PIN: keine
- Ermittlung MAC Adresse und IP:
OK Taste drücken - Neustart Prozedur:
keine
Webinterface
- Das Webinterface des Telefons wird mit folgendem Link erreicht:
http://<ip-adress-des-Telefons> - Kennwort nach Factory Reset:
admin - Neustart Prozedur:
Settings-> Rechts Reiter Starten -> Neustart -> OK - Eintrag des Provisionierungs-Servers
Settings-> Rechts Reiter Automatische Einrichtung -> URL: Server eintragen, z. B. https://www.teamsip.com/yealink -> Bestätigen -> Sofortiges Autoprovisioning Start
Anleitung zur manuellen Konfiguration
noch keine Anleitung vorhanden.
Funktionsumfang
Das Telefon unterstützt folgende Leistungsmerkmale mit Firmware Version
Firmware Version: 36.73.0.40
Leistungsmerkmal | Verfügbar | Bemerkung |
---|---|---|
1. Provisionierung | ||
1.1 Power over Ethernet | ja | |
1.2 http Unterstützung | ja | |
1.3 https Unterstützung: | ja | |
1.4 Automatisches Konfigurationsupdate | noch nicht getestet | |
1.5 Firmware Update | ja | Über Download Link in u. a. Provisionierungs Beispiel. |
1.6 Automatische Zeiteinstellung | ja | |
1.7 Registration Timer | ja | |
1.8 DTMF RFC2833 | ja | |
1.9 Signalisierung UDP | ja | |
noch nicht getestet | ||
1.11 Signalisierung TLS | noch nicht getestet | |
noch nicht getestet | ||
1.13 Passwortschutz Weboberfläche | ja | |
2. Funktionstasten | ||
2.1 Lautstärke | ja | |
2.2 Stummschaltung | ja | |
2.3 Lauthören | ja | |
2.4 Bestätigen | ja | |
2.5 Abbrechen | ja | |
2.6 Headset | ja | |
2.7 Nicht stören | ja | als programmierbare Taste unterhalb Display |
2.8 Wahlwiederholung | ja | Über Anruferlisten Taste |
2.9 Rufumleitung | ja | als programmierbare Taste unterhalb Display |
2.10 BLF Tasten Status | ja | |
2.11 BLF Tasten Übernahme | ja | |
2.12 BLF Tasten Kurzwahl | ja | |
2.13 Anruflisten | ja | |
3. Basisfunktionen | ||
3.1 Codec Unterstützung | ja | G.722, G.711(A/μ), G. 723.1, G.729AB, G.726, GSM |
3.2 Rufnummern Anzeige | ja | |
3.3 Rufnummern Anzeige nach Verbinden / Pickup | ja | |
3.4 Wahl bei aufgelegtem Hörer | ja | Nummer wählen, OK |
3.5 Anzeige Gesprächsdauer | ja | Display Mitte |
3.6 Anklopfen | ja | Anklopfendes Gespräch annehmen mit "Antworten" unterhalb Display |
3.7 Makeln | ja | Taste "Wechseln" unterhalb Display |
3.8 Dreier-Konferenz | ja | Ersten Anruf aufbauen, zweiten Anruf annehmen und Halten. Taste "Konferenz" drücken. |
3.9 Weiterleitung mit Rückfrage | ja | Anruf annehmen, Kurzwahltaste drücken, sprechen und dann auflegen. |
3.10 Weiterleitung ohne Rückfrage | ja | Anruf annehmen. Kurzwahltaste drücken und "Weiterleiten" drücken. |
3.11 Rückruf bei Besetzt | ja | Kann als Yealink Funktion am Telefon programmiert werden. |
3.12 Gespräch länger 30 Minuten | ja | |
4. Zusatzfunktionen | ||
4.1 verschiedene Klingeltöne | ja | Settings -> Rufton |
4.2 Eigene Klingeltöne | nein | nicht über die Weboberfläche |
4.3 Vollduplex-Freisprechen | ja | |
4.5 Selbstbeschriftende Tasten | ja | |
4.6 XML-Anwendungen | ja | nicht getestet |
5. Telefonbuch | ||
5.1 Telefonbuch am Telefon | ja | |
5.2 Telefonbuch über LDAP | ja | Für LDAP konfigurierte "Kontakte" Taste unterhab Display, ggf. Zurück drücken. |
5.3 Telefonbuch über xml | ||
6. Anrufbeantworter | ||
6.1 MWI - Message Waiting Indicator | ja | Am Display und als blinkende Lampe am Telefon. |
7. Headset | ||
7.1 Kabelheadsets | ja | |
7.2 EHS Headsets | ja | Plantronics W740 mit Schnurlos Headset und Annahmeknopf am Hörer, Einrasthebel auf A an Basisstation. Verbindungskabel siehe Plantronics EHS und Yealink |
8. Erweiterungsmodule | ||
8.1 Funktionstasten Erweiterungsmodul | nein | |
9. TeamSIP Funktionen | ||
9.1 Rufumleitung in TeamSIP | ja | |
9.2 Persönliches Telefonbuch aus TeamSIP | ja | Anzeige der Kontakte über LDAP |
9.3 Globales Telefonbuch aus Teamsip | ja | Anzeige der Kontakte über LDAP |
9.4 Callcenter Anmeldung mit Status Anzeige | ja | |
9.5 Neustart über SIP Notify | ja | sip notify tiptel-reboot-cfg 10001905a |
9.6 Reload über SIP Notify | noch nicht getestet | |
9.7 Klingelton Unterscheidung intern/extern | distinctive_ring_tones.alert_info.1.text = Intern |
TeamSIP Provisionierungs Template
Nutzbare Tasten
Unten aufgeführtes Beispiel nutzt 18 belegbare Tasten in der TeamSIP Weboberfläche.
Am Telefon nutzbar sind die Tasten neben dem Display und mit Ebenen Umschalt-Taste.
Konfigurationsbeispiel
Das geteste Telefon wurde mit dieser Provisionierungsvorlage als Telefon in TeamSIP konfiguriert:
TeamSIP Telefon Template
#!version:1.0.0.1
##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.##
##This template file is applicable to SIP-T28P/T26P/T22P/T20P/T21P/T19P/T46G/T42G/T41P IP phones running firmware version 72 or later.##
##For more information on configuration parameters, refer to Yealink_SIP-T2_Series_T19P_T4_Series_IP_Phones_Auto_Provisioning_Guide.##
##manuell
phone_setting.talk_and_dial_power_led_enable = 1
##Lautstärke Hörer
voice.handset.spk_vol = 15
### Textlänge 0=Standard 1=erweitert
features.config_dsskey_length = 1
### Datumsformat
local_time.date_format = 5
### interner Klingelton aktivieren
account.1.alert_info_url_enable = 1
### TFCUST-110962 Ghostcalls blockieren
features.direct_ip_call_enable = 0
account.1.sip_trust_ctrl = 1
#######################################################################################
## Account1 Basic Settings ##
#######################################################################################
account.1.enable = 1
account.1.label = %TF_NUMMER%
account.1.display_name = %TF_NUMMER%
account.1.auth_name = %TF_ACCOUNT%
account.1.user_name = %TF_ACCOUNT%
account.1.password = %TF_PASSWORD%
account.1.sip_server_host = %TF_SIPSERVER%
account.1.sip_server_port = 5060
account.1.outbound_proxy_enable = 0
account.1.outbound_host =
account.1.outbound_port = 5060
account.1.transport = 0
account.1.backup_outbound_host =
account.1.backup_outbound_port = 5060
account.1.proxy_require =
account.1.anonymous_call = 0
account.1.reject_anonymous_call = 0
account.1.expires = 900
account.1.sip_listen_port = 5060
account.1.100rel_enable = 0
account.1.precondition = 0
#
account.1.cid_source = 2
account.1.session_timer.enable = 0
account.1.session_timer.expires =
account.1.session_timer.refresher = 0
account.1.enable_user_equal_phone = 0
account.1.srtp_encryption = 0
account.1.ptime = 0
account.1.shared_line =
account.1.dialoginfo_callpickup =
account.1.dtmf.type = 1
account.1.dtmf.info_type = 0
account.1.dtmf.dtmf_payload = 101
account.1.nat.nat_traversal = 0
account.1.nat.stun_server = stun.teamfon.com
account.1.nat.stun_port = 10000
account.1.nat.udp_update_enable = 1
account.1.nat.udp_update_time = 30
account.1.nat.rport = 0
account.1.advanced.timer_t1 = 2
account.1.advanced.timer_t2 = 4
account.1.advanced.timer_t4 = 5
account.1.blf.subscribe_period = 3600
account.1.blf.blf_list_uri =
account.1.codec.1.enable = 1
account.1.codec.1.payload_type = PCMU
account.1.codec.1.priority = 3
account.1.codec.1.rtpmap = 0
account.1.codec.2.enable = 1
account.1.codec.2.payload_type = PCMA
account.1.codec.2.priority = 2
account.1.codec.2.rtpmap = 8
account.1.codec.3.enable = 0
account.1.codec.3.payload_type = G723_53
account.1.codec.3.priority = 0
account.1.codec.3.rtpmap = 4
account.1.codec.4.enable = 0
account.1.codec.4.payload_type = G723_63
account.1.codec.4.priority = 0
account.1.codec.4.rtpmap = 4
account.1.codec.5.enable = 0
account.1.codec.5.payload_type = G729
account.1.codec.5.priority = 3
account.1.codec.5.rtpmap = 18
account.1.codec.6.enable = 1
account.1.codec.6.payload_type = G722
account.1.codec.6.priority = 1
account.1.codec.6.rtpmap = 9
account.1.codec.7.enable = 0
account.1.codec.7.payload_type = iLBC
account.1.codec.7.priority = 0
account.1.codec.7.rtpmap = 102
account.1.codec.8.enable = 0
account.1.codec.8.payload_type = G726-16
account.1.codec.8.priority = 0
account.1.codec.8.rtpmap = 112
account.1.codec.9.enable = 0
account.1.codec.9.payload_type = G726-24
account.1.codec.9.priority = 0
account.1.codec.9.rtpmap = 102
account.1.codec.10.enable = 0
account.1.codec.10.payload_type = G726-32
account.1.codec.10.priority = 0
account.1.codec.10.rtpmap = 2
account.1.codec.11.enable = 0
account.1.codec.11.payload_type = G726-40
account.1.codec.11.priority = 0
account.1.codec.11.rtpmap = 104
#
network.internet_port.type = 0
network.internet_port.ip =
network.internet_port.mask =
network.internet_port.gateway =
network.primary_dns =
network.secondary_dns =
network.pppoe.user =
network.pppoe.password =
network.bridge_mode = 1
network.pc_port.ip = 10.0.0.1
network.pc_port.mask = 255.255.255.0
network.pc_port.dhcp_server = 1
network.dhcp.start_ip = 10.0.0.10
network.dhcp.end_ip = 10.0.0.100
network.vlan.internet_port_enable = 0
network.vlan.internet_port_vid = 0
network.vlan.internet_port_priority = 0
network.vlan.pc_port_enable = 0
network.vlan.pc_port_vid = 0
network.vlan.pc_port_priority = 0
network.qos.signaltos = 40
network.qos.rtptos = 40
network.port.max_rtpport = 11800
network.port.min_rtpport = 11780
# syslog note
#syslog.server =
#
lang.gui = German
lang.wui = German
#
local_time.time_zone = +1
local_time.time_zone_name = Germany(Berlin)
local_time.ntp_server1 = %TF_SIPSERVER%
local_time.ntp_server2 = ntp.tmwr.de
#
phone_setting.inter_digit_time = 4
phone_setting.flash_hook_timer = 1
phone_setting.lock = 0
phone_setting.ring_type =
phone_setting.contrast = 2
phone_setting.active_backlight_level = 10
phone_setting.backlight_time = 1800
phone_setting.product_name =
#
distinctive_ring_tones.alert_info.1.text = Intern
distinctive_ring_tones.alert_info.1.ringer = %TF_ALERT_INTERN%
#
call_waiting.enable = 1
#
features.hotline_number =
features.busy_tone_delay =
features.key_tone = 0
features.pound_key.mode = 1
#
phone_setting.emergency.number = 110,112
#######################################################################################
## Transfer ##
#######################################################################################
transfer.semi_attend_tran_enable = 1
transfer.blind_tran_on_hook_enable = 0
transfer.tran_others_after_conf_enable = 0
transfer.on_hook_trans_enable = 1
transfer.dsskey_deal_type = 1
transfer.multi_call_trans_enable =
#
#######################################################################################
## Line Key ##
#######################################################################################
###Except T19D Model
###T21D/T20P X ranges from 1 to 2
###T22P/T26P X ranges from 1 to 3
###T28P X ranges from 1 to 6
###T41P/T42G X ranges from 1 to 15
###T46G X ranges from 1 to 27
#memorykey.1.sub_type = BLF
#memorykey.1.line = 0
#memorykey.1.value = %TF_NTNUMMER_1%
#memorykey.1.pickup_value = **
#memorykey.1.type = 16
#memorykey.1.label = %TF_NTNAME_1%
linekey.2.sub_type = BLF
linekey.2.line = 0
linekey.2.value = %TF_NTNUMMER_1%
linekey.2.pickup_value = **
linekey.2.type = 16
linekey.2.label = %TF_NTNAME_1%
linekey.3.sub_type = BLF
linekey.3.line = 0
linekey.3.value = %TF_NTNUMMER_2%
linekey.3.pickup_value = **
linekey.3.type = 16
linekey.3.label = %TF_NTNAME_2%
linekey.4.sub_type = BLF
linekey.4.line = 0
linekey.4.value = %TF_NTNUMMER_3%
linekey.4.pickup_value = **
linekey.4.type = 16
linekey.4.label = %TF_NTNAME_3%
linekey.5.sub_type = BLF
linekey.5.line = 0
linekey.5.value = %TF_NTNUMMER_4%
linekey.5.pickup_value = **
linekey.5.type = 16
linekey.5.label = %TF_NTNAME_4%
linekey.6.sub_type = BLF
linekey.6.line = 0
linekey.6.value = %TF_NTNUMMER_5%
linekey.6.pickup_value = **
linekey.6.type = 16
linekey.6.label = %TF_NTNAME_5%
linekey.7.sub_type = BLF
linekey.7.line = 0
linekey.7.value = %TF_NTNUMMER_6%
linekey.7.pickup_value = **
linekey.7.type = 16
linekey.7.label = %TF_NTNAME_6%
linekey.8.sub_type = BLF
linekey.8.line = 0
linekey.8.value = %TF_NTNUMMER_7%
linekey.8.pickup_value = **
linekey.8.type = 16
linekey.8.label = %TF_NTNAME_7%
linekey.9.sub_type = BLF
linekey.9.line = 0
linekey.9.value = %TF_NTNUMMER_8%
linekey.9.pickup_value = **
linekey.9.type = 16
linekey.9.label = %TF_NTNAME_8%
linekey.10.sub_type = BLF
linekey.10.line = 0
linekey.10.value = %TF_NTNUMMER_9%
linekey.10.pickup_value = **
linekey.10.type = 16
linekey.10.label = %TF_NTNAME_9%
linekey.11.sub_type = BLF
linekey.11.line = 0
linekey.11.value = %TF_NTNUMMER_10%
linekey.11.pickup_value = **
linekey.11.type = 16
linekey.11.label = %TF_NTNAME_10%
linekey.12.sub_type = BLF
linekey.12.line = 0
linekey.12.value = %TF_NTNUMMER_11%
linekey.12.pickup_value = **
linekey.12.type = 16
linekey.12.label = %TF_NTNAME_11%
linekey.13.sub_type = BLF
linekey.13.line = 0
linekey.13.value = %TF_NTNUMMER_12%
linekey.13.pickup_value = **
linekey.13.type = 16
linekey.13.label = %TF_NTNAME_12%
linekey.14.sub_type = BLF
linekey.14.line = 0
linekey.14.value = %TF_NTNUMMER_13%
linekey.14.pickup_value = **
linekey.14.type = 16
linekey.14.label = %TF_NTNAME_13%
linekey.15.sub_type = BLF
linekey.15.line = 0
linekey.15.value = %TF_NTNUMMER_14%
linekey.15.pickup_value = **
linekey.15.type = 16
linekey.15.label = %TF_NTNAME_14%
linekey.16.sub_type = BLF
linekey.16.line = 0
linekey.16.value = %TF_NTNUMMER_15%
linekey.16.pickup_value = **
linekey.16.type = 16
linekey.16.label = %TF_NTNAME_15%
linekey.17.sub_type = BLF
linekey.17.line = 0
linekey.17.value = %TF_NTNUMMER_16%
linekey.17.pickup_value = **
linekey.17.type = 16
linekey.17.label = %TF_NTNAME_16%
linekey.18.sub_type = BLF
linekey.18.line = 0
linekey.18.value = %TF_NTNUMMER_17%
linekey.18.pickup_value = **
linekey.18.type = 16
linekey.18.label = %TF_NTNAME_17%
linekey.19.sub_type = BLF
linekey.19.line = 0
linekey.19.value = %TF_NTNUMMER_18%
linekey.19.pickup_value = **
linekey.19.type = 16
linekey.19.label = %TF_NTNAME_18%
linekey.20.sub_type = BLF
linekey.20.line = 0
linekey.20.value = %TF_NTNUMMER_19%
linekey.20.pickup_value = **
linekey.20.type = 16
linekey.20.label = %TF_NTNAME_19%
linekey.21.sub_type = BLF
linekey.21.line = 0
linekey.21.value = %TF_NTNUMMER_20%
linekey.21.pickup_value = **
linekey.21.type = 16
linekey.21.label = %TF_NTNAME_20%
linekey.22.sub_type = BLF
linekey.22.line = 0
linekey.22.value = %TF_NTNUMMER_21%
linekey.22.pickup_value = **
linekey.22.type = 16
linekey.22.label = %TF_NTNAME_21%
linekey.23.sub_type = BLF
linekey.23.line = 0
linekey.23.value = %TF_NTNUMMER_22%
linekey.23.pickup_value = **
linekey.23.type = 16
linekey.23.label = %TF_NTNAME_22%
linekey.24.sub_type = BLF
linekey.24.line = 0
linekey.24.value = %TF_NTNUMMER_23%
linekey.24.pickup_value = **
linekey.24.type = 16
linekey.24.label = %TF_NTNAME_23%
linekey.25.sub_type = BLF
linekey.25.line = 0
linekey.25.value = %TF_NTNUMMER_24%
linekey.25.pickup_value = **
linekey.25.type = 16
linekey.25.label = %TF_NTNAME_24%
linekey.26.sub_type = BLF
linekey.26.line = 0
linekey.26.value = %TF_NTNUMMER_25%
linekey.26.pickup_value = **
linekey.26.type = 16
linekey.26.label = %TF_NTNAME_25%
linekey.27.sub_type = BLF
linekey.27.line = 0
linekey.27.value = %TF_NTNUMMER_26%
linekey.27.pickup_value = **
linekey.27.type = 16
linekey.27.label = %TF_NTNAME_26%
#
#######################################################################################
## Expansion Modul Key ##
#######################################################################################
expansion_module.1.key.1.type = 16
expansion_module.1.key.1.line = 1
expansion_module.1.key.1.value = %TF_NTNUMMER_27%
expansion_module.1.key.1.label = %TF_NTNAME_27%
expansion_module.1.key.1.xml_phonebook = 0
expansion_module.1.key.1.pickup_value = **
expansion_module.1.key.2.type = 16
expansion_module.1.key.2.line = 1
expansion_module.1.key.2.value = %TF_NTNUMMER_28%
expansion_module.1.key.2.label = %TF_NTNAME_28%
expansion_module.1.key.2.xml_phonebook = 0
expansion_module.1.key.2.pickup_value = **
expansion_module.1.key.3.type = 16
expansion_module.1.key.3.line = 1
expansion_module.1.key.3.value = %TF_NTNUMMER_29%
expansion_module.1.key.3.label = %TF_NTNAME_29%
expansion_module.1.key.3.xml_phonebook = 0
expansion_module.1.key.3.pickup_value = **
expansion_module.1.key.4.type = 16
expansion_module.1.key.4.line = 1
expansion_module.1.key.4.value = %TF_NTNUMMER_30%
expansion_module.1.key.4.label = %TF_NTNAME_30%
expansion_module.1.key.4.xml_phonebook = 0
expansion_module.1.key.4.pickup_value = **
expansion_module.1.key.5.type = 16
expansion_module.1.key.5.line = 1
expansion_module.1.key.5.value = %TF_NTNUMMER_31%
expansion_module.1.key.5.label = %TF_NTNAME_31%
expansion_module.1.key.5.xml_phonebook = 0
expansion_module.1.key.5.pickup_value = **
expansion_module.1.key.6.type = 16
expansion_module.1.key.6.line = 1
expansion_module.1.key.6.value = %TF_NTNUMMER_32%
expansion_module.1.key.6.label = %TF_NTNAME_32%
expansion_module.1.key.6.xml_phonebook = 0
expansion_module.1.key.6.pickup_value = **
expansion_module.1.key.7.type = 16
expansion_module.1.key.7.line = 1
expansion_module.1.key.7.value = %TF_NTNUMMER_33%
expansion_module.1.key.7.label = %TF_NTNAME_33%
expansion_module.1.key.7.xml_phonebook = 0
expansion_module.1.key.7.pickup_value = **
expansion_module.1.key.8.type = 16
expansion_module.1.key.8.line = 1
expansion_module.1.key.8.value = %TF_NTNUMMER_34%
expansion_module.1.key.8.label = %TF_NTNAME_34%
expansion_module.1.key.8.xml_phonebook = 0
expansion_module.1.key.8.pickup_value = **
expansion_module.1.key.9.type = 16
expansion_module.1.key.9.line = 1
expansion_module.1.key.9.value = %TF_NTNUMMER_35%
expansion_module.1.key.9.label = %TF_NTNAME_35%
expansion_module.1.key.9.xml_phonebook = 0
expansion_module.1.key.9.pickup_value = **
expansion_module.1.key.10.type = 16
expansion_module.1.key.10.line = 1
expansion_module.1.key.10.value = %TF_NTNUMMER_36%
expansion_module.1.key.10.label = %TF_NTNAME_36%
expansion_module.1.key.10.xml_phonebook = 0
expansion_module.1.key.10.pickup_value = **
#######################################################################################
expansion_module.1.key.11.type = 16
expansion_module.1.key.11.line = 1
expansion_module.1.key.11.value = %TF_NTNUMMER_37%
expansion_module.1.key.11.label = %TF_NTNAME_37%
expansion_module.1.key.11.xml_phonebook = 0
expansion_module.1.key.11.pickup_value = **
expansion_module.1.key.12.type = 16
expansion_module.1.key.12.line = 1
expansion_module.1.key.12.value = %TF_NTNUMMER_38%
expansion_module.1.key.12.label = %TF_NTNAME_38%
expansion_module.1.key.12.xml_phonebook = 0
expansion_module.1.key.12.pickup_value = **
expansion_module.1.key.13.type = 16
expansion_module.1.key.13.line = 1
expansion_module.1.key.13.value = %TF_NTNUMMER_39%
expansion_module.1.key.13.label = %TF_NTNAME_39%
expansion_module.1.key.13.xml_phonebook = 0
expansion_module.1.key.13.pickup_value = **
expansion_module.1.key.14.type = 16
expansion_module.1.key.14.line = 1
expansion_module.1.key.14.value = %TF_NTNUMMER_40%
expansion_module.1.key.14.label = %TF_NTNAME_40%
expansion_module.1.key.14.xml_phonebook = 0
expansion_module.1.key.14.pickup_value = **
expansion_module.1.key.15.type = 16
expansion_module.1.key.15.line = 1
expansion_module.1.key.15.value = %TF_NTNUMMER_41%
expansion_module.1.key.15.label = %TF_NTNAME_41%
expansion_module.1.key.15.xml_phonebook = 0
expansion_module.1.key.15.pickup_value = **
expansion_module.1.key.16.type = 16
expansion_module.1.key.16.line = 1
expansion_module.1.key.16.value = %TF_NTNUMMER_42%
expansion_module.1.key.16.label = %TF_NTNAME_42%
expansion_module.1.key.16.xml_phonebook = 0
expansion_module.1.key.16.pickup_value = **
expansion_module.1.key.17.type = 16
expansion_module.1.key.17.line = 1
expansion_module.1.key.17.value = %TF_NTNUMMER_43%
expansion_module.1.key.17.label = %TF_NTNAME_43%
expansion_module.1.key.17.xml_phonebook = 0
expansion_module.1.key.17.pickup_value = **
expansion_module.1.key.18.type = 16
expansion_module.1.key.18.line = 1
expansion_module.1.key.18.value = %TF_NTNUMMER_44%
expansion_module.1.key.18.label = %TF_NTNAME_44%
expansion_module.1.key.18.xml_phonebook = 0
expansion_module.1.key.18.pickup_value = **
expansion_module.1.key.19.type = 16
expansion_module.1.key.19.line = 1
expansion_module.1.key.19.value = %TF_NTNUMMER_45%
expansion_module.1.key.19.label = %TF_NTNAME_45%
expansion_module.1.key.19.xml_phonebook = 0
expansion_module.1.key.19.pickup_value = **
expansion_module.1.key.20.type = 16
expansion_module.1.key.20.line = 1
expansion_module.1.key.20.value = %TF_NTNUMMER_46%
expansion_module.1.key.20.label = %TF_NTNAME_46%
expansion_module.1.key.20.xml_phonebook = 0
expansion_module.1.key.20.pickup_value = **
#######################################################################################
## Programable Key ##
#######################################################################################
###T20P X ranges from 1 to 9
###T28P/T26P X ranges from 1 to 14
###T41P/T42G/T19P/T21P X ranges from 1 to 11
###T46G/T22P X ranges from 1 to 13
programablekey.2.type = 38
programablekey.2.label = Kontakte
# voice note
voice.vad = 0
voice.cng = 1
voice.echo_cancellation = 1
# voice.side_tone = -3
voice.jib.adaptive = 1
voice.jib.min = 0
voice.jib.max = 300
voice.jib.normal = 120
#
voice_mail.number.1 = *99
voice_mail.number.2 = *99
voice_mail.number.3 = *99
voice_mail.number.4 = *99
voice_mail.number.5 = *99
voice_mail.number.6 = *99
# voice note
voice.tone.country = Germany
voice.tone.dial =
voice.tone.ring =
voice.tone.busy =
voice.tone.congestion =
voice.tone.callwaiting =
voice.tone.dialrecall =
voice.tone.record =
voice.tone.info =
voice.tone.stutter =
voice.tone.message =
voice.tone.autoanswer =
# ldap note
ldap.enable = 1
ldap.name_filter = (&(telNrBusiness1=*)(sn=%))
ldap.number_filter =
ldap.host = %TF_SIPSERVER%
ldap.port = 389
ldap.base =
ldap.user = uid=%TF_CONTEXT%%TF_NUMMER%,ou=authentication,dc=teamfom,dc=de
ldap.password = %TF_PASSWORD%
ldap.max_hits = 100
ldap.name_attr = sn cn
ldap.numb_attr = telNrBusiness1 telNrBusiness2 telNrMobile telNrPrivate
ldap.display_name = %cn
ldap.version = 3
ldap.base = ou=Teamfon,ou=userdata,ou=appls,dc=teamware,dc=de
ldap.ldap_sort = 0
ldap.call_in_lookup = 0
#
auto_provision.mode = 7
#
auto_provision.schedule.periodic_minute =
auto_provision.schedule.time_from = 02:00
auto_provision.schedule.time_to = 03:00
auto_provision.schedule.dayofweek = 0123456
#
auto_provision.pnp_enable = 0
auto_provision.dhcp_option.list_user_options =
#
auto_provision.server.url = http://%TF_SIPSERVER%/yealink
# security note
security.user_password = admin:team05
security.user_password = user:
#
#######################################################################################
## Dial Plan ##
#######################################################################################
dialplan.area_code.code =
dialplan.area_code.min_len = 1
dialplan.area_code.max_len = 15
dialplan.area_code.line_id =
dialplan.block_out.number.1 =
dialplan.block_out.line_id.1 =
#######################################################################################
## Firmware ##
#######################################################################################
firmware.url = http://%TF_SIPSERVER%/yealink/firmware/36.73.0.40.rom