Snom C520
Anleitungen
Bedienungsanleitung:
Weitere auf der Webseite verfügbare Dokumente:
Webseite:
Funktionen am Telefon
- Default Admin PIN: keine
- Ermittlung MAC Adresse und IP:
Menü Taste - 2 1 - Neustart Prozedur:
Menü 3 1 3 - Factory Reset:
Press [Menu] key + 07#*1850#
Webinterface
- Das Webinterface des Telefons wird mit folgendem Link erreicht:
http://<ip-adress-des-Telefons> - Kennwort nach Factory Reset:
keines - Ermittlung der MAC Adresse:
Status -> General - Neustart Prozedur:
Servicing → Reboot Eintrag des Provisionierungs-Servers
Das System unterstützt Zero Touch Provisioining
Servicing → Provisioning → Provisioning server: URL Server eintragen, z. b.: http://www.teamsip.com/snom/snom320-{mac}.htm -> Save-> Reboot -> Yes
Anleitung zur manuellen Konfiguration
noch keine Anleitung vorhanden.
Funktionsumfang
Das Telefon unterstützt folgende Leistungsmerkmale mit Firmware Version
Software Version: 1.40.25-0-ENG
Beschreibung der Testfälle siehe unter Telefon Leistungsmerkmale
Leistungsmerkmal | Verfügbar | Bemerkung |
---|---|---|
1. Provisionierung | ||
1.1 Power over Ethernet | ja | |
1.2 http Unterstützung | ja | |
1.3 https Unterstützung: | ja | |
1.4 Automatisches Konfigurationsupdate | ja | Geänderte Konfigurationen werden nach einem Neustart gelesen. Die Neustart Anforderung aus TeamSIP funktioniert. |
1.5 Firmware Update | ja | |
1.6 Automatische Zeiteinstellung | ja | |
1.7 Registration Timer | ja | |
1.8 DTMF RFC2833 | ja | |
1.9 Signalisierung UDP | ja | |
1.10 Signalisierung TCP | ja | nicht getestet |
1.11 Signalisierung TLS | ja | nicht getestet |
1.12 Verschlüsselung Sprachkanal mit SRTP | ja | nicht getestet |
1.13 Passwortschutz Weboberfläche | ja | |
2. Funktionstasten | ||
2.1 Lautstärke | ja | |
2.2 Stummschaltung | ja | |
2.3 Lauthören | ja | |
2.4 Bestätigen | ja | |
2.5 Abbrechen | ja | |
2.6 Headset | nein | |
2.7 Nicht stören | nein | |
2.8 Wahlwiederholung | nein | |
2.9 Rufumleitung | nein | |
2.10 BLF Tasten Status | nein | |
2.11 BLF Tasten Übernahme | nein | |
2.12 BLF Tasten Kurzwahl | nein | |
2.13 Anruflisten | ja | |
2.14 optische Anzeige verpasste Anrufe | ja | als Meldung im Display |
2.15 optische Anzeige AB-Nachrichten | ja | Benachrichtigungs Licht gelb, Meldung, dass Nachricht vorliegt |
3. Basisfunktionen | ||
3.1 Codec Unterstützung | ja | G711, G729A, G723.1, G722, G726, GSM 6.10 (Full rate) |
3.2 Rufnummern Anzeige | ja | |
3.3 Rufnummern Anzeige nach Verbinden / Pickup | ja | |
3.4 Wahl bei aufgelegtem Hörer | ja | |
3.5 Anzeige Gesprächsdauer | ja | |
3.6 Anklopfen | ja | |
3.7 Makeln | ja | Mit Pfeiltaste auswählen und "Weiter" drücken |
3.8 Dreier-Konferenz | ja | Über Pfeiltaste und Konferenz |
3.9 Weiterleitung mit Rückfrage | ja | "Transfer" drücken, Nummer und "Wählen", nach Rücksprache "Transfer" |
3.10 Weiterleitung ohne Rückfrage | ja | "Transfer" drücken, Nummer und "Transfer" |
3.11 Rückruf bei Besetzt | ||
3.12 Gespräch länger 30 Minuten | ja | |
4. Zusatzfunktionen | ||
4.1 verschiedene Klingeltöne | ja | |
4.2 Eigene Klingeltöne | nein | |
4.3 Vollduplex-Freisprechen | ja | |
4.5 Selbstbeschriftende Tasten | nein | |
4.6 XML-Anwendungen | ||
5. Telefonbuch | ||
5.1 Telefonbuch am Telefon | ja | Verfügbar über "Directory"-Taste. |
5.2 Telefonbuch über LDAP | ja | Verzeichnis → LDAP |
5.3 Telefonbuch über xml | ||
6. Anrufbeantworter | ||
6.1 MWI - Message Waiting Indicator | ja | Anzeige im Display und Nachrichten-Lampe leuchtet. |
7. Headset | ||
7.1 Kabelheadsets | ||
7.2 EHS Headsets | ||
8. Erweiterungsmodule | ||
8.1 Funktionstasten Erweiterungsmodul | ||
9. TeamSIP Funktionen | ||
9.1 Rufumleitung in TeamSIP | ja | |
9.2 Persönliches Telefonbuch aus TeamSIP | ja | Anzeige der Kontakte über LDAP |
9.3 Globales Telefonbuch aus Teamsip | ja | Anzeige der Kontakte über LDAP |
9.4 Callcenter Anmeldung mit Status Anzeige | ||
9.5 Neustart über SIP Notify | nein | |
9.6 Reload über SIP Notify | nicht getestet | |
9.7 Klingelton Unterscheidung intern/extern | nicht getestet |
TeamSIP Provisionierungs Template
Nutzbare Tasten
Unten aufgeführtes Beispiel nutzt keine belegbare Tasten in der TeamSIP Weboberfläche.
Konfigurationsbeispiel
Das geteste Telefon wurde mit dieser Provisionierungsvorlage als Telefon in TeamSIP konfiguriert:
TeamSIP Telefon Template
<?xml version="1.0"?>
<settings>
<time_date>
<date_format>DD/MM/YY</date_format>
<hr24_clock>1</hr24_clock>
<ntp_dhcp_option>0</ntp_dhcp_option>
<ntp_server>1</ntp_server>
<ntp_server_addr>%TF_SIPSERVER%</ntp_server_addr>
<ntp_server_update_interval>1000</ntp_server_update_interval>
<timezone_dhcp_option>0</timezone_dhcp_option>
<selected_timezone>Europe/Berlin</selected_timezone>
<selected_timezone>Europe/Germany</selected_timezone>
<daylight_saving_auto_adjust>1</daylight_saving_auto_adjust>
<daylight_saving_user_defined>0</daylight_saving_user_defined>
<daylight_saving_start_month>March</daylight_saving_start_month>
<daylight_saving_start_week>2</daylight_saving_start_week>
<daylight_saving_start_day>Sunday</daylight_saving_start_day>
<daylight_saving_start_hour>2</daylight_saving_start_hour>
<daylight_saving_end_month>November</daylight_saving_end_month>
<daylight_saving_end_week>1</daylight_saving_end_week>
<daylight_saving_end_day>Sunday</daylight_saving_end_day>
<daylight_saving_end_hour>2</daylight_saving_end_hour>
<daylight_saving_amount>60</daylight_saving_amount>
</time_date>
<profile>
<admin>
<access_password>team%TF_CONTEXT%</access_password>
</admin>
<user>
<access_password>team%TF_CONTEXT%</access_password>
</user>
</profile>
<remoteDir>
<ldap_directory_name>LDAP</ldap_directory_name>
<ldap_number_filter></ldap_number_filter>
<ldap_firstname_filter>(&(telNrBusiness1=*)(sn=%))</ldap_firstname_filter>
<ldap_lastname_filter></ldap_lastname_filter>
<ldap_server_address>%TF_SIPSERVER%</ldap_server_address>
<ldap_port>389</ldap_port>
<ldap_authentication_type>simple</ldap_authentication_type>
<ldap_base>ou=Teamfon,ou=userdata,ou=appls,dc=teamware,dc=de</ldap_base>
<ldap_user_name>uid=%TF_CONTEXT%%TF_NUMMER%,ou=authentication,dc=teamfon,dc=de</ldap_user_name>
<ldap_access_password>%TF_PASSWORD%</ldap_access_password>
<ldap_max_hits>200</ldap_max_hits>
<ldap_work_number_attributes>telNrBusiness1</ldap_work_number_attributes>
<ldap_mobile_number_attributes>telNrMobile</ldap_mobile_number_attributes>
<ldap_other_number_attributes>telNrBusiness2</ldap_other_number_attributes>
<ldap_protocol_version>version_3</ldap_protocol_version>
<ldap_search_delay>0</ldap_search_delay>
<ldap_incall_lookup_enable>0</ldap_incall_lookup_enable>
<ldap_outcall_lookup_enable>0</ldap_outcall_lookup_enable>
<ldap_enable>1</ldap_enable>
<ldap_firstname_attribute>sn</ldap_firstname_attribute>
<ldap_lastname_attribute>cn</ldap_lastname_attribute>
<ldap_check_certificate>0</ldap_check_certificate>
</remoteDir>
<sip_account>
<idx id="1">
<sip_account_enable>1</sip_account_enable>
<label>%TF_NACHNAME% %TF_VORNAME%</label>
<display_name>%TF_VORNAME% %TF_NACHNAME%</display_name>
<user_id>%TF_ACCOUNT%</user_id>
<authentication_name>%TF_ACCOUNT%</authentication_name>
<authentication_access_password>%TF_PASSWORD%</authentication_access_password>
<dial_plan>x+P</dial_plan>
<inter_digit_timeout>3</inter_digit_timeout>
<maximum_call_number>6</maximum_call_number>
<music_on_hold_enable>1</music_on_hold_enable>
<mwi_enable>1</mwi_enable>
<mwi_ignore_unsolicited>0</mwi_ignore_unsolicited>
<mwi_uri></mwi_uri>
<stutter_dial_tone_enable>1</stutter_dial_tone_enable>
<voice_encryption_enable>0</voice_encryption_enable>
<primary_sip_server_port>5060</primary_sip_server_port>
<primary_sip_server_address>%TF_SIPSERVER%</primary_sip_server_address>
<primary_outbound_proxy_server_port>5060</primary_outbound_proxy_server_port>
<primary_outbound_proxy_server_address>%TF_SIPSERVER%</primary_outbound_proxy_server_address>
<primary_registration_server_port>5060</primary_registration_server_port>
<primary_registration_server_address>%TF_SIPSERVER%</primary_registration_server_address>
<primary_registration_expires>900</primary_registration_expires>
<access_code_retrieve_voicemail>*99</access_code_retrieve_voicemail>
<access_code_group_call_pickup>**</access_code_group_call_pickup>
<access_code_direct_call_pickup>**</access_code_direct_call_pickup>
<nat_traversal_stun_enable>0</nat_traversal_stun_enable>
<nat_traversal_stun_server_port>3478</nat_traversal_stun_server_port>
<nat_traversal_stun_server_address>stun.teamfon.com</nat_traversal_stun_server_address>
<nat_traversal_udp_keep_alive_enable>1</nat_traversal_udp_keep_alive_enable>
<nat_traversal_udp_keep_alive_interval>30</nat_traversal_udp_keep_alive_interval>
<network_conference_enable>0</network_conference_enable>
<sip_session_timer_enable>0</sip_session_timer_enable>
<sip_session_timer_min>90</sip_session_timer_min>
<sip_session_timer_max>1800</sip_session_timer_max>
<dtmf_transport_method>auto</dtmf_transport_method>
<codec_priority>
<idx id="1">g722</idx>
<idx id="2">g711a</idx>
<idx id="3">g711u</idx>
<idx id="4">g729</idx>
<idx id="5">g726</idx>
</codec_priority>
<unregister_after_reboot_enable>0</unregister_after_reboot_enable>
<transport_mode>udp</transport_mode>
<backup_outbound_proxy_server_port>5060</backup_outbound_proxy_server_port>
<backup_outbound_proxy_server_address>%TF_SIPSERVER%</backup_outbound_proxy_server_address>
<registration_retry_time>10</registration_retry_time>
<local_sip_port>5060</local_sip_port>
<check_trusted_certificate>0</check_trusted_certificate>
<normal_jitter>80</normal_jitter>
<g729_annexb_enable>0</g729_annexb_enable>
<call_rejection_response_code>486</call_rejection_response_code>
</idx>
<use_first_trusted_certificate_for_all>0</use_first_trusted_certificate_for_all>
</sip_account>
<network>
<ip>
<dhcp_enable>1</dhcp_enable>
<dns1></dns1>
<dns2></dns2>
<static_ip_addr></static_ip_addr>
<subnet_mask></subnet_mask>
<gateway_addr></gateway_addr>
<dns_cache_clear_timeout>60</dns_cache_clear_timeout>
</ip>
<nat>
<masquerading_enable>0</masquerading_enable>
<public_ip_addr></public_ip_addr>
<public_sip_port>5060</public_sip_port>
<public_rtp_port_start>18000</public_rtp_port_start>
<public_rtp_port_end>19000</public_rtp_port_end>
</nat>
<vlan>
<wan>
<enable>0</enable>
<id>0</id>
<priority>0</priority>
</wan>
</vlan>
<rtp>
<port_start>18000</port_start>
<port_end>19000</port_end>
</rtp>
<lldp_med>
<enable>1</enable>
<interval>30</interval>
</lldp_med>
<eapol>
<enable>0</enable>
<identity></identity>
<access_password></access_password>
</eapol>
<vendor_class_id>snomC520</vendor_class_id>
<user_class>snomC520</user_class>
</network>
<provisioning>
<bootup_check_enable>1</bootup_check_enable>
<crypto_enable>0</crypto_enable>
<crypto_passphrase></crypto_passphrase>
<dhcp_option_enable>1</dhcp_option_enable>
<dhcp_option_priority_1>66</dhcp_option_priority_1>
<dhcp_option_priority_2>159</dhcp_option_priority_2>
<dhcp_option_priority_3>160</dhcp_option_priority_3>
<firmware_url>http://%TF_SIPSERVER%/snom/fw/c520_fw.htm</firmware_url>
<fw_server_username></fw_server_username>
<fw_server_access_password></fw_server_access_password>
<resync_mode>config_and_firmware</resync_mode>
<resync_time>0</resync_time>
<server_address>http://%TF_SIPSERVER%/snom/snom320-{mac}.htm</server_address>
<server_username></server_username>
<server_access_password></server_access_password>
<check_trusted_certificate>1</check_trusted_certificate>
<click_to_dial>1</click_to_dial>
<remote_check_sync_enable>1</remote_check_sync_enable>
<pnp_enable>1</pnp_enable>
<pnp_response_timeout>10</pnp_response_timeout>
<schedule_mode>interval</schedule_mode>
<weekdays></weekdays>
<weekdays_start_hr>0</weekdays_start_hr>
<weekdays_end_hr>0</weekdays_end_hr>
</provisioning>
<user_pref>
<language>de</language>
<web_language>de</web_language>
<lcd_contrast>4</lcd_contrast>
<backlight>high</backlight>
<idle_backlight>off</idle_backlight>
<backlight_timeout>30</backlight_timeout>
<absent_timeout>30</absent_timeout>
<idle_to_logo_timeout>0</idle_to_logo_timeout>
<logo_to_idle_timeout>60</logo_to_idle_timeout>
<account>
<idx id="1">
<ringer>1</ringer>
</idx>
<idx id="2">
<ringer>1</ringer>
</idx>
<idx id="3">
<ringer>1</ringer>
</idx>
</account>
<ringer_volume>5</ringer_volume>
<speaker_volume>5</speaker_volume>
<key_beep_enable>1</key_beep_enable>
<hold_reminder>
<enable>1</enable>
<interval>30</interval>
</hold_reminder>
<call_waiting>
<mode>enable</mode>
<tone_enable>1</tone_enable>
<tone_interval>30</tone_interval>
</call_waiting>
<notify>
<led>
<missed_call>
<enable>0</enable>
</missed_call>
</led>
</notify>
</user_pref>
<log>
<syslog_enable>0</syslog_enable>
<syslog_level>2</syslog_level>
<syslog_server_address></syslog_server_address>
<syslog_server_port>514</syslog_server_port>
</log>
<web>
<http_port>80</http_port>
<https_port>443</https_port>
<https_enable>0</https_enable>
</web>
<call_settings>
<account>
<idx id="1">
<block_anonymous_enable>0</block_anonymous_enable>
<outgoing_anonymous_enable>0</outgoing_anonymous_enable>
<dnd_enable>0</dnd_enable>
<dnd_incoming_calls>reject</dnd_incoming_calls>
<call_fwd_always_enable>0</call_fwd_always_enable>
<call_fwd_always_target></call_fwd_always_target>
<call_fwd_busy_enable>0</call_fwd_busy_enable>
<call_fwd_busy_target></call_fwd_busy_target>
<cfna_enable>0</cfna_enable>
<cfna_target></cfna_target>
<cfna_delay>6</cfna_delay>
</idx>
</account>
<missed_call_alert_enable>1</missed_call_alert_enable>
</call_settings>
<softkey>
<idle>redial,line,bt_device1,bt_device2,bt_connect,blank,call_log,blank,dir</idle>
<call_active>end,transfer,conf,bt_device1,bt_device2,speaker_audio,xferline,confline</call_active>
<call_held>end,new,resume,transfer,conf,xferline,confline</call_held>
<live_dial>backspc,input,dial,bt_device1,bt_device2,redial</live_dial>
</softkey>
<speed_dial>
<idx id="0">
<name>%TF_NTNAME_1%</name>
<number>%TF_NTNUMMER_1%</number>
<account>0</account>
</idx>
<idx id="1">
<name>%TF_NTNAME_2%</name>
<number>%TF_NTNUMMER_2%</number>
<account>0</account>
</idx>
<idx id="2">
<name></name>
<number></number>
<account>0</account>
</idx>
<idx id="3">
<name></name>
<number></number>
<account>0</account>
</idx>
<idx id="4">
<name></name>
<number></number>
<account>0</account>
</idx>
<idx id="5">
<name></name>
<number></number>
<account>0</account>
</idx>
<idx id="6">
<name></name>
<number></number>
<account>0</account>
</idx>
<idx id="7">
<name></name>
<number></number>
<account>0</account>
</idx>
<idx id="8">
<name></name>
<number></number>
<account>0</account>
</idx>
<idx id="9">
<name></name>
<number></number>
<account>0</account>
</idx>
</speed_dial>
<ringersetting>
<idx id="1">
<ringer_text></ringer_text>
<ringer_type>1</ringer_type>
</idx>
<idx id="2">
<ringer_text></ringer_text>
<ringer_type>1</ringer_type>
</idx>
<idx id="3">
<ringer_text></ringer_text>
<ringer_type>1</ringer_type>
</idx>
<idx id="4">
<ringer_text></ringer_text>
<ringer_type>1</ringer_type>
</idx>
<idx id="5">
<ringer_text></ringer_text>
<ringer_type>1</ringer_type>
</idx>
<idx id="6">
<ringer_text></ringer_text>
<ringer_type>1</ringer_type>
</idx>
<idx id="7">
<ringer_text></ringer_text>
<ringer_type>1</ringer_type>
</idx>
<idx id="8">
<ringer_text></ringer_text>
<ringer_type>1</ringer_type>
</idx>
</ringersetting>
</settings>